Specifications
Model | CUT-30(Single-phase) | CUT-40(Single-phase) | CUT-50(Single-phase) | CUT-60(Single-phase) | |
---|---|---|---|---|---|
Input voltage(V) | AC220V ±15% | AC220V ±15% | AC220V ±15% | AC220V ±15% | |
Frequency(HZ) | 50/60 | 50/60 | 50/60 | 50/60 | |
Rated input power(KVA) | 4 | 5.6 | 7.3 | 9.2 | |
No-load voltage(V) | 265 | 265 | 265 | 265 | |
Output current(A) | 10-30 | 10-40 | 10-50 | 10-60 | |
Rated output voltage(V) | 92 | 96 | 100 | 104 | |
Rated duty cycle(%) | 60 | 60 | 60 | 60 | |
Efficiency(%) | 85 | 85 | 85 | 85 | |
Power factor | 0.93 | 0.93 | 0.93 | 0.93 | |
Insulation class | F | F | F | F | |
Protection degree | IP21 | IP21 | IP21 | IP21 | |
Weight(KG) | 6.8 | 7.2 | 7.5 | 14.5 | |
Dimensions(MM) | 385 x 150 x 285 | 385 x 150 x 285 | 480 x 204 x 375 | 480 x 204 x 375 | |
Applied welding rod diameter(MM) | 1.6-3.2 | 1.6-3.2 | 1.6-4.0 | 1.6-4.0 | |
Cutting thickness(MM) | 1-8 | 1-12 | 1-16 | 1-20 | |
◉Our engineer can write the source code of the welding machine to develop new functions according to the needs of customers. Learn More |
Features
1. Innovative technology
◉High frequency inverter, innovative and advanced design
◉High load duration
◉High efficiency and energy saving
2. Stronger and faster cutting ability
◉Compared with traditional cutting machines, arc welding has a higher success rate and arc voltage
◉Strong cutting ability and fast cutting speed
◉The cut is beautiful, narrow and smooth, not easy to deform
3. Fault protection
◉If the voltage is too high, the current is too high, and the voltage is too low, the welding machine will automatically protect.
◉The overall temperature of the welding machine is too high, it will be automatically protected, and it is safe to use.
4. Small size and easy to work
◉Ultra-small size, convenient to move and carry when working outdoors
5. Improve cutting gas source
◉Using compressed air cutting air source, more economical and efficient than traditional flame cutting machine
6. Precise current adjustment
◉The current can be adjusted accurately when cutting
7. Complete configuration
◉Provide the required configuration, electrode clamp, ground wire, handheld shield and welding brush