17 Feb 2022
This is a welded grill, a drive chain, two sprockets, a handle and several metal grill rods are all components of this grill. This is a barbecue grill transformed from waste barbecue grills and made by welding, which is convenient and practical, saves time and effort, and is sturdy and durable.
Supply
Transmission chain, Sprocket, Screw rod, Nuts, Stainless steel pipe, Iron sheet
Tools
ZX7-320kingsiri welding machine, Cutting machine, Sanding machine, Drilling machine, Angle grinder, Flat vise, Tape measure, Marker pen
Method
1. Using a cutting machine, measure the length of all the metal square pipes with a tape measure and a marker and cut them well
2. Using a drilling machine, punch all the iron pieces according to the marks made by the caliper
3. Using an angle grinder and a flat vise, fix 7 of the metal iron pieces in the flat vise, and make a slot between the hole and the edge
4. Use a welding machine to weld and fix the frame and iron sheet above the grill
5. Use a welding machine to weld and fix a nut on both ends of the grill frame
6. Using a cutting machine, measure the length of the metal barbecue stick with a tape measure and a marker and cut it
7. Using a sander, sand the end of the metal grill stick to a pinpoint shape
8. Use a welding machine to weld and fix the metal grill rod and iron gear
9. Using a welding machine, weld the metal pipe into a rectangle and fix it to the bottom of the grill
10. Use an angle grinder to cut and grind the screw rod to a certain length
11. The screw rod passes through the nuts at both ends of the grill frame, and then tighten and fix with the nuts respectively
12. Use a welding machine to weld two sprockets on one side of the grill and install the drive chain
13. Using a welding machine, weld a metal square tube to fix the drive chain between the two sprockets, and install a handle on the sprocket
14. Pass the metal grill rod through the iron plate and fix it on the iron plate and the transmission chain
15. In this way, this barbecue grill is completed
Keywords: welding machine
Originally published 17 Feb 2022, updated 17 Feb 2022.