03 Feb 2022
This is a metal deforming chair. Several metal square tubes, screw rods and nuts of different lengths are all components of this metal deforming chair. This is a movable metal deformation chair made of metal welding, which is full of creativity, foldable and easy to carry.
Supply
Metal square tube, Screw rod, Nuts
Tools
ZX7-420 kingsiri welding machine, Cutting machine, Drilling machine, Angle grinder, Flat vise, Tape measure, Marker pen
Method
1. Using a cutting machine, measure the length of all the metal square pipes with a tape measure and a marker and cut them well
2. Using a drilling machine, punch all the metal square pipes according to the marks made by the marker
3. Using an angle grinder and a marker, fix all the metal square tubes in a flat vise, and draw lines and grooves between the holes
4. Use a welding machine to weld and fix the bottom of the metal deformed chair
5. Use a welding machine to weld and fix the metal deformation chair cushion
6. Using a welding machine, measure the length of the bottom of the metal deformation chair with a tape measure and a marker, and weld the nut to fix it
7. Use screw rods to connect and assemble the bottom, seat cushion and backrest of the metal deformed chair
8. Sit on the seat cushion of the metal deformation chair, the back of the chair will automatically bounce
9. This metal deformation chair is finished
Keywords: welding machine
Originally published 03 Feb 2022, updated 03 Feb 2022.