28 Dec 2021
This is a metal Christmas tree. A base, a column, five layers and some decorative pieces are all the components of this metal Christmas tree. This is a metal Christmas tree made by welding, which is beautiful, strong and reusable.
Supply
Iron wire, Square pipe, Round pipe, Rectangular iron sheet, Decorative piece
Tools
Square, Calipers, Marker, Hammer, WS-275M kingsiri welding machine, Cutting machine, Drilling machine, Sanding machine, Polishing machine
Method
1. Use a ruler to measure the length of various pipes, and mark with a marker
2. Use a cutting machine to cut the marked pipe
3. Use a ruler to measure the length of the hole and mark it with a marker
4. Use a drilling machine to drill the cut pipe
5. Use a Sanding machine to process the pipe after cutting and drilling
6. Use a welding machine to weld the bottom frame and other frames
7. The welded bottom frame and other frames use a grinder to process smooth welds
8. Use a caliper to mark the length of the iron sheet, and use a cutting machine to cut all the iron sheets
9. Use a welding machine to weld and fix all the frames and connecting iron sheets
10. Use a grinder to smooth the welded joints of the welded frame
11. Use a ruler to measure the length between each frame and mark it
12. Use a welding machine to weld and fix the base and the column
13. Use a welding machine to weld and fix the column and frame according to the marks
14. The metal wire passes through the small holes on the frame of each layer, and the metal wire is spiral
15. Use calipers and markers to draw the decorative parts, cut and polish the decorative parts
16. The processed decorative parts are punched with a drilling machine and the iron wire is threaded
17. The stars, balls, and tubes are welded in sequence, and hit the column with a hammer
18. Use a welding machine to weld the decorative parts to each layer separately
19. The finished product is painted with golden hand spray paint
20. This metal Christmas tree is finished
Keywords: welding machine
Originally published 28 Dec 2021, updated 28 Dec 2021.